Bambu Lab AMS 2 Pro – Automatic Material System

Condition:  Good

The AMS 2 Pro is unused, but it is not sealed in its original film or in its original inner packaging. There are minor scratches: please see the detailed photos and descriptions below.

Product Features

• Active Air Vent 65°C Filament Drying – fast drying and airtight storage
• Air-tight Filament Storage – keeps filament dry for weeks
• Up to 24-color / Multi-material Printing – connect up to 4 AMS 2 Pro & 8 AMS HT units
• Brushless Servo Feeding Motor – 60% faster feeding speed
• RFID Filament Sync – auto-matches drying settings for Bambu official filaments
• Ceramic Inlet – Vickers hardness 1200 for enhanced durability
• Tool-Free Filament Tube Access – direct access from the top, no disassembly

Condition Notes

• Unit is unused, but not in original shrink wrap and not in original inner packaging.
• Missing: Bambu Bus Cable-6Pin and printed manual.
• Cosmetic: minor scratches on the housing.
• Functionality: unit is unused and has not been put into service.

Compatibility

The AMS 2 Pro is compatible with all Bambu Lab printers. Specific accessory configurations are required depending on your printer model:

• A1 series: A1 series AMS Hub (SA013) required. One Switching Adapter per AMS 2 Pro for drying.
• X1/P1 series: Filament Buffer (SA003) or AMS Hub (SA002-N), PTFE Tube Coupler (FAZ006), and 4-pin Cable (CAB002-N) required. One Switching Adapter per unit for drying.
• P2S: P2S Filament Buffer (SA011) required for 1–2 units; add 4-in-1 PTFE Adapter (FAZ013-N) for more than two.
• H2S: No extra accessory for a single unit; 4-in-1 PTFE Adapter (FAZ013-N) required for more than one.
• H2D/H2C: No extra accessory for 1–2 units; 4-in-1 PTFE Adapter (FAZ013-N) required for more than two (SA014 recommended for H2C).
• X2D: No extra accessory for 1–2 units; 4-in-1 PTFE Adapter (FAZ013-N) required for 3+ units.
• A2L: No extra accessory for a single unit; 4-in-1 PTFE Adapter (FAZ013-N) required for 2+ units.

Note: All accessories mentioned above are sold separately. AMS lite cannot be combined with other AMS units.

Specifications

* Maximum drying temperature is reached only when ambient temperature is above 25 °C. Filaments marked with * in the official manual require a higher drying temperature; AMS HT is recommended for best results.

What's in the Box

• ✅ Bambu AMS 2 Pro unit
• ✅ Desiccant
• ✅ PTFE Tube (as shown in the included accessories list)
• ❌ Bambu Bus Cable-6Pin – NOT included
• ❌ Manual – NOT included

Please note: Original film and original inner packaging are also not included. The unit has minor cosmetic scratches.