About
Description
Dual-Nozzle FDM 3D Printer
Bambu Lab X2D
Xcellence Made Simple
The Bambu Lab X2D is an enclosed dual-nozzle FDM 3D printer designed to make multi-material printing, clean support removal and precision production easier. It combines mechanical nozzle switching, intelligent extrusion control, active chamber heating and AI-assisted monitoring in a compact desktop platform.
2 Nozzles
Mechanical dual-nozzle system
300°C
Maximum nozzle temperature
65°C
Actively heated chamber
256 mm
Main-nozzle X and Y build area
Why Choose X2D
Advanced Printing Without the Usual Complexity
The X2D brings flagship Bambu Lab automation to dual-nozzle printing. The main nozzle handles the model while the auxiliary nozzle can handle support or a secondary material, reducing difficult post-processing and enabling cleaner multi-material workflows.
Dual-Nozzle System
Mechanical nozzle switching enables separate model and support materials without adding another motor to the moving toolhead.
PMSM Servo Extruder
The proprietary servo system monitors torque and position at high frequency to maintain stable extrusion and identify filament-feed problems early.
Dynamic Flow Calibration
The printer calibrates the extrusion system before printing and compensates for changes caused by nozzle condition, filament and operating variables.
Dual-Intake Cooling
The cooling architecture is designed to improve overhangs, bridges and fine surface details while printing common materials.
Active Chamber Heating
The chamber can be actively heated to 65°C to support stronger adhesion and more stable printing with engineering materials.
AI Monitoring
AI cameras check plate placement and debris before printing, then monitor for issues such as spaghetti, nozzle clumping and purge-chute jams.
Indoor Air Filtration
Three-stage filtration combines a G3 pre-filter, H12 HEPA filter and coconut-shell activated carbon layer.
Certified Low Emissions
X2D is UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic.
Multi-Material Printing
Cleaner Supports, Less Manual Finishing
The main direct-drive nozzle is optimized for precise model printing. The auxiliary extrusion system can handle support or a secondary material, allowing supports to separate more cleanly and reducing visible marks on completed parts.
Main nozzle
Direct-drive extrusion
Auxiliary nozzle
Dedicated secondary-material extrusion
Technical Specifications
Bambu Lab X2D
Printing & Build Volume
| Printing Technology | Fused Deposition Modeling (FDM) |
| Main Nozzle Build Volume | 256 × 256 × 260 mm³ |
| Auxiliary Nozzle Build Volume | 235.5 × 256 × 256 mm³ |
| Included Nozzle | 0.4 mm |
| Supported Nozzles | 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm |
| Filament Diameter | 1.75 mm |
Construction & Dimensions
| Chassis | Plastic and steel |
| Outer Frame | Plastic, glass and metal |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 16.25 kg |
| Gross Weight | 20.2 kg; 22.2 kg for Combo |
| Maximum Nozzle Temperature | 300°C |
Package Contents
What's in the Box
Bambu Lab X2D Printer
Textured PEI Build Plate
External Exhaust Fan Bundle
Accessory Box
Spool Holder
AMS 2 Pro — Combo Version Only
The contents of the package may differ between the standard X2D and X2D Combo. AMS 2 Pro is included only with the Combo configuration.
Description
Dual-Nozzle FDM 3D Printer
Bambu Lab X2D
Xcellence Made Simple
The Bambu Lab X2D is an enclosed dual-nozzle FDM 3D printer designed to make multi-material printing, clean support removal and precision production easier. It combines mechanical nozzle switching, intelligent extrusion control, active chamber heating and AI-assisted monitoring in a compact desktop platform.
2 Nozzles
Mechanical dual-nozzle system
300°C
Maximum nozzle temperature
65°C
Actively heated chamber
256 mm
Main-nozzle X and Y build area
Why Choose X2D
Advanced Printing Without the Usual Complexity
The X2D brings flagship Bambu Lab automation to dual-nozzle printing. The main nozzle handles the model while the auxiliary nozzle can handle support or a secondary material, reducing difficult post-processing and enabling cleaner multi-material workflows.
Dual-Nozzle System
Mechanical nozzle switching enables separate model and support materials without adding another motor to the moving toolhead.
PMSM Servo Extruder
The proprietary servo system monitors torque and position at high frequency to maintain stable extrusion and identify filament-feed problems early.
Dynamic Flow Calibration
The printer calibrates the extrusion system before printing and compensates for changes caused by nozzle condition, filament and operating variables.
Dual-Intake Cooling
The cooling architecture is designed to improve overhangs, bridges and fine surface details while printing common materials.
Active Chamber Heating
The chamber can be actively heated to 65°C to support stronger adhesion and more stable printing with engineering materials.
AI Monitoring
AI cameras check plate placement and debris before printing, then monitor for issues such as spaghetti, nozzle clumping and purge-chute jams.
Indoor Air Filtration
Three-stage filtration combines a G3 pre-filter, H12 HEPA filter and coconut-shell activated carbon layer.
Certified Low Emissions
X2D is UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic.
Multi-Material Printing
Cleaner Supports, Less Manual Finishing
The main direct-drive nozzle is optimized for precise model printing. The auxiliary extrusion system can handle support or a secondary material, allowing supports to separate more cleanly and reducing visible marks on completed parts.
Main nozzle
Direct-drive extrusion
Auxiliary nozzle
Dedicated secondary-material extrusion
Technical Specifications
Bambu Lab X2D
Printing & Build Volume
| Printing Technology | Fused Deposition Modeling (FDM) |
| Main Nozzle Build Volume | 256 × 256 × 260 mm³ |
| Auxiliary Nozzle Build Volume | 235.5 × 256 × 256 mm³ |
| Included Nozzle | 0.4 mm |
| Supported Nozzles | 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm |
| Filament Diameter | 1.75 mm |
Construction & Dimensions
| Chassis | Plastic and steel |
| Outer Frame | Plastic, glass and metal |
| Physical Dimensions | 392 × 406 × 478 mm³ |
| Net Weight | 16.25 kg |
| Gross Weight | 20.2 kg; 22.2 kg for Combo |
| Maximum Nozzle Temperature | 300°C |
Package Contents
What's in the Box
Bambu Lab X2D Printer
Textured PEI Build Plate
External Exhaust Fan Bundle
Accessory Box
Spool Holder
AMS 2 Pro — Combo Version Only
The contents of the package may differ between the standard X2D and X2D Combo. AMS 2 Pro is included only with the Combo configuration.
Bambu Lab
by
Bambu Lab
Bambu Lab X2D 3D Printer
- Regular price
- $649.00
- Sale price
- $649.00
- Regular price
-
$649.00
Shipping calculated at checkout.
Providing the best new Tech Experience, Energy Independence and Robotics Ways of Optimisation
Providing the best new Tech Experience, Energy Independence and Robotics Ways of Optimisation
Packaging note:
Equipment is being supplied in a manufacturer packaging
